Connections And Control Elements - Lightmaxx CLS FX Laser Bar System User Manual

Connections and Control Elements:

Number Function
1
Laser Unit
2
LED Strobe Lights
3 Microphone
4 IR Sensor
5
Power Link
6 Power Input
7 DMX In/Output
8
Wireless aerial
9
Rotary control
10 LED Display
11 Remote Switch
12
Key switch
Operation:
Start:
Connect the device to the power supply and wait a few seconds until it is ready for operation.
Menu:
Navigation in the menu is performed using the four menu buttons below the display. Use the
„Menu" key to activate the menu, navigation is via the „Up" and „Down" keys. A correspon-
ding selection is confi rmed with the „Enter" key.
Description
Laser unit! Please do not look directly into the opening.
4 x 1 Watt LED Strobe, weiß
Microphone for Sound 2 Light function.
Sensor for infrared remote control.
For looping through the power signal.
Power Supply.
DMX In- and Output, 3-Pole
Receives the signal from the foot switch.
Microphone sensitivity setting in Sound 2 Light mode.
Display for setting the functions.
Input for emergency stop switch.
For switching the laser on and off.
front
back