Hama TS33C Operating Instructions Manual page 4

Warning – Batteries
• Only use batteries (or rechargeable
batteries) that match the specified
type.
• Do not mix old and new batteries or
batteries of a different type or make.
• When inserting batteries, note the
correct polarity (+ and - markings) and
insert the batteries accordingly. Failure
to do so could result in the batteries
leaking or exploding.
• Do not overcharge batteries.
• Keep batteries out of the reach of
children.
• Do not short circuit the batteries/
rechargeable batteries and keep
them away from uncoated metal
objects.
4. Getting Started
Inserting the battery
• Open the battery compartment
(2), insert the batteries with the
correct polarity and close the battery
compartment (2). The outdoor sensor is
now ready for operation.
Replacing the batteries
• Open the battery compartment (2),
remove and properly dispose of the
dead batteries and insert two new AA
batteries with the correct polarity. Then
close the battery compartment cover.
Note
Before use, make sure that you insert
the batteries in the measuring station
first and then in the base station.
5. Installation
Note – Installation
• We recommend initially placing the
base and measuring stations in the
intended locations without installing
them and making all the settings
described in 6. Operation.
• Only install the stations once
the appropriate settings have
been made and a stable wireless
connection is established.
Note
• The wireless transmission range
between the measuring and base
stations is up to 30 metres in open
spaces.
Before installation, ensure that
wireless transmission will not
be disrupted by interference or
obstacles like buildings, trees,
vehicles, high-voltage lines, etc.
• Before the final installation, ensure
that there is sufficient reception
between the intended installation
locations.
3