Hama TS33C Operating Instructions Manual page 3

G Operating instruction
Controls and Displays
A Measuring station
1. LED indicator
2. Battery compartment
3. RESET button
= restores factory settings
4. CHANNEL button = channel
selection
5. Recess for wall mounting
6. °C/°F button = switches between
°C and °F
7. LCD display
1. Explanation of Warning Symbols
and Notes
Warning
This symbol is used to indicate safety
instructions or to draw your attention to
specific hazards and risks.
Note
This symbol is used to indicate
additional information or important
notes.
2. Package Contents
• TS33C Outdoor Sensor
• These operating instructions
3. Safety Notes
• The product is intended for private,
non-commercial use only.
• Do not operate the product outside the
2
power limits given in the specifications.
• Do not use the product in moist
environments and avoid splashes.
• Do not use the product in the
immediate vicinity of heaters or other
heat sources or in direct sunlight.
• Do not use the product in areas where
the use of electronic devices is not
permitted.
• Do not put the product near
interference fields, metal frames,
computers, TVs, etc. Electronic devices
and window frames can negatively
affect the product's functionality.
• Do not drop the product and do not
expose it to any major shocks.
• Do not open the device or continue to
operate it if it becomes damaged.
• Do not attempt to service or repair the
product yourself. Leave any and all
service work to qualified experts.
• Keep the packaging material out of
the reach of children due to the risk of
suffocation.
• Dispose of packaging material
immediately according to locally
applicable regulations.
• Do not modify the product in any way.
Doing so voids the warranty.
Warning – Batteries
• Immediately remove and dispose of
dead batteries from the product.