1. T h e r m o couple Po r t : Polarized blades from miniature unfamiliar tasks. thermocouple probe plugs in here. • Place ONLY thermocouples (type K, J, or T) in the DT150 or DTO150 thermocouple ports. 2. LCD Display: Displays temperature and relative clock information.
K/J/T Selection Celsius scales by pressing the “˚F/˚C” button. Scales cannot be changed The button marked “K/K/T” is used to match the DT150 with the type when either the relative or record mode is active. of thermocouple you are using. After initial power-up, press the “K/J/T”...
Page 4
0.1% of the reading. To ensure your instrument is performing at its peak, send it to the UEi factory or a qualified 1. Calibrate your meter annually to ensure it meets original instrument calibration facility for annual calibration.
Any implied warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited to the express warranty. UEi shall not be liable for loss of use of the instrument or other incidental or consequential damages, expenses, or economic loss, or for any claim or claims for such damage, expenses or economic loss.
Need help?
Do you have a question about the DT150 and is the answer not in the manual?
Questions and answers