9. E m i s s i v i ty annunciator. 10. Laser targeting on / off push-button. Indicates the use of laser equipment and the category of laser used. 11. Laser on annunciator. 12. Alarm mode indica t o r. INF200-MAN P. 1...
Each time the trigger is pulled your INF200 monitors four different LCD. The temperature reading will update each time a new lower readings, regardless of the selected mode. They are: t e m p e rature is measured.
.95. Audible Alarms To prepare these surfaces to provide an accurate reading using The INF200 will sound an audible alarm at both an upper and a lower temperature limit, whig you set. a non-contact thermometer, pre-treat (to emit energy) the...
These guidelines will help you attain long and reliable service from the emissivity setting of your INF200. your meter: To set emissivity you must pass through the alarm setting function. As 1.
Page 6
Zinc (oxidized) 0.1* or contamination. Follow cleaning instructions. Check battery for proper Galvanized iron voltage and tight fit in the battery clip. Tin-plated steel 0.1* Gold (polished) 0.1* Silver (polished) 0.1* Chromium (polished) 0.1* *Emissivity various with purity. INF200-MAN P. 5...
Page 7
Rubber (rough) 0.98 Plastics (various, solid) 0.8 to 0.95 Plastic films (.05 mm thick) 0.5 to 0.95 Polythene film (.03 mm thick) 0.2 to 0.3 Paper and cardboard Silicone polish (.03 mm thick) *Emissivity various with purity. INF200-MAN P. 6...
Any implied warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited to the express warranty. UEi shall not be liable for loss of use of the instrument or other incidental or consequential damages, expenses, or economic loss, or for any claim or claims for such damage, expenses or economic loss.
Need help?
Do you have a question about the INF200 and is the answer not in the manual?
Questions and answers