Chapter 2 Preparing For Installation; Package Contents; Safety Precautions - TP-Link T3700G-28TQ Installation Manual

Chapter 2 Preparing for Installation

2.1

Package Contents

Make sure that the package contains the following items. If any of the listed items is damaged or
missing, please contact your distributor.
One Switch
One Resouce CD
2.2

Safety Precautions

To avoid any device damage and bodily injury caused by improper use, please observe the following
rules.
Safety Precautions
■
Keep the power off during the installation.
■
Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good skin contact and is
■
well grounded.
Use only the power cord provided with the switch.
■
Make sure that the supply voltage matches the specifications indicated on the rear panel of the
■
switch.
Ensure the vent hole is well ventilated and unblocked.
■
Do not open or remove the cover of the switch.
■
Before cleaning the device, cut off the power supply. Do not clean it by the waterish cloth, and never
■
use any other liquid cleaning method.
Place the device with its bottom surface downward.
■
Site Requirements
■
Temperature/Humidity
One Power Cord, One Console
Cable and One USB Cable
Two Mounting Brackets, Eight
Screws and Four Rubber Feet
40℃
0℃
JetStream L3 Stackable Managed Switch
Installation Guide
Preparing for Installation 05