Advertisement
Mounting M12 connector
If the fixed ring loosens, the connector will come off, causing this product to gen-
erate a communication error. Before use, check that the fixed ring is not loose.
● Firmly tighten the fixed ring by rotating it.
5
List of functions
Function
Setting on main unit
2-point teaching (SET Key)
Limit-teaching (UP Key)
Teaching
Limit-teaching (DOWN Key)
Auto teaching (SET Key)
Teaching cancel
Threshold value fine Adjust-
Threshold value Setting
ment
Key lock function
Set / Release
Output Operation Setting Light-ON/Dark-ON
Light sensitivity setting
Light sensitivity select
Response time setting
Selection from 4-mode
Timer setting
Timer mode
Timer time setting
Timer time
Shift amount setting
Amount select
Shift threshold value set-
Shift threshold value
ting
Teaching lock setting
Lock ON / OFF
Incident light intensity / Dis-
Setting items in the digital
played in percentage / Peak/
display
bottom value
Time period hold setting
Hold ON / OFF
Setting of digital display
Turning ON / OFF
turning
ECO Setting
FULL / ON / OFF
Display adjustment setting Set / Release
Reset setting
Execution
Disabled / Interference
Emitting frequency setting
prevention/Ambient environ-
ment resistance
Emitting frequency
(Interference prevention
Selection from 4-mode
setting)
Threshold value tracking
Cycle(time)
Cycle setting
Threshold value tracking
ON / OFF
Output Operation Setting
Threshold value tracking
Storage cycle (each time)
Storage cycle setting
Threshold value tracking
Teaching mode select
Algorithm setting
Preventive maintenance
─
threshold value 1 setting
Preventive maintenance
─
threshold value 2 setting
Preventive maintenance
threshold value detection
─
lag time setting
Operating time
─
Number of data save opera-
─
tions
Notification Flag Setting
─
Notification Event Code
─
Note: For the IO-Link communication setting, refer to the attached sheet,
"Index list".
6
Operation procedure
● If you change settings, press the SET key before you turn the power
Fixed ring
OFF. Otherwise your changes will be lost.
● If settings are configured simultaneously on the main unit side and
on the IO-Link communication side, the settings that are applied last
will be used.
When you turn the power ON, the amplifier is in RUN mode. Press the
MODE key (indicated by black arrow in the illustrations below) to switch
IO-Link communi-
from one mode to the next.
cation setting
(Note)
Index2
Index2
Index2
Index2
Index2
Sensing output operation mode
Index60
Index12
Index61_1
Index77
Light sensitivity setting mode
Index66
Index64_1
Index64_2
Index74_1
Index74_2
Index85
Index83_1
Index83_2
7
Teaching
Index82
● Please note that if the threshold values are very close to each other,
Index80
objects may not be detected reliably.
Index2
● Teaching is performed in RUN mode and during IO-Link communi-
Index2
cation.
There are different teaching methods available. Which teaching method is
Index76_1
recommended depends on the sensor type and whether the sensing object
is present or not present or moving.
Index76_2
Sensing condition
Sensing object is present and easily
Index75_1
detectable.
Sensing object is very small.
Index75_2
Other objects are in the background.
Production line cannot be stopped and
Index75_3
sensing object is moving
All teaching methods are available for the thru-beam, the mirror reflection
Index75_4
type and the reflective type.
Index160
Index161
Index162
Index163
Index164
Index168
Index169
2
RUN mode
● Displays the threshold value in green
and the incident light intensity in red.
● Used for teaching, making fine
adjustments to the threshold values
(see page 3), and activating the
key lock function (see page 3).
● Select either Light-ON or Dark-ON.
The default setting is
● Refer to sensing output operation
mode on page 4 for details.
● Displays the light sensitivity setting
and enables its setting
● Refer to light sensitivity setting mode
on page 4 for details.
PRO mode
● Used for advanced settings.
● Refer to PRO mode on page 4
for details.
RUN mode
(Light-ON).
Recommended teaching
method
2-point teaching
Limit teaching
Auto teaching
Advertisement
