Button Descriptions - Sony WEGA KV 36FS13 Operating Instructions Manual

Introducing the FD Trinitron Wega

Button Descriptions

1
2
3
4
5
6
7
8
9
q;
RM-Y180
Model Remote
KV-36FS13 RM-Y180
KV-36FS17
RM-Y181
(See page 6)
4
The POWER button on the remote control (no. 11 in the illustration
below) activates both the remote control and the TV.
Button
1 MUTING
qa
2 SYSTEM OFF
qs
3 TV/VCR
qd
qf
qg
m
qh
M
N
x
qj X
RECORD
qk
4 SLEEP
ql
w;
5 PICTURE MODE
6 JUMP
7 TV/SAT
8 RESET
9 VOL +/-
q; CODE SET
qa POWER buttons
(GREEN)
Description
Mutes the sound. Press again or press VOL + to restore
the sound.
Powers off all Sony equipment at once. (This feature
may not work with older Sony equipment.)
Switch between TV and VCR mode. If you have a
non-Sony VCR, you will need to program the remote
control to recognize your VCR. For details, see
"Programming the Remote Control" on page 50
Rewind
Fast-forward
Play
Stop
Pause (Press again to resume playback or recording)
To record, press N and z simultaneously.
Press repeatedly until the TV displays the time in
minutes (15, 30, 45, 60, or 90) that you want the TV to
remain on before shutting off automatically. Cancel by
pressing until SLEEP OFF appears.
Cycles through the available video picture modes:
Vivid, Standard, Movie, Sports. Also available in the Video
menu. For details, see "Selecting Video Options" on
page 36.
Press to jump back and forth between two channels.
The TV alternates between the current channel and the
last channel that was selected.
Switches between the TV and SAT (satellite) inputs
when in SAT FUNCTION mode.
Provides quick access for changing available audio
settings. For details, see "Selecting Audio Options" on
page 38.
Press when in a menu to reset the settings to the
factory defaults.
Adjusts the volume.
Used for programming the remote control to operate
non-Sony video equipment. For details, see
"Programming the Remote Control" on page 50.
Turn on and off the TV and other audio/video
equipment.