Sony WEGA KV 36FS13 Operating Instructions Manual page 21

Cable and Antenna
(KV-36FS17 only)
Basic Cable Box
Connections
If your cable provider does not feature local channels, you may find
this set-up convenient.
To receive channels using an antenna, instead of using the CATV cable
1
Select antenna mode by pressing the ANT button on the remote
control. (This is a toggle: pressing the button once selects antenna
mode; pressing the button again selects cable mode.)
2
Turn the Cable to OFF (see page 40).
3
Perform the Auto Program function (see page 40).
Cable Box and Cable
This is the preferred basic cable TV hookup to use if your cable TV
company scrambles some channels, but not all of them (pay channels
vs. regular cable channels), and you need to use a cable box.
With this setup you can:
Use the TV remote control to change channels on your cable box
when the signal is scrambled.
Use the TV remote control to change channels using your TV
when the signal is not scrambled. (Your TV's tuner provides a
better signal than the cable box.)
Use the PIP feature normally with the CATV input.
Use the PIP feature partially with the cable box. (When you
switch the TV input to AUX — to use the cable box — the
scrambled picture will display only in the main window. If you
turn on the PIP, you will be able to see any of the regular channels
in the PIP window, but you cannot SWAP the pictures between
the main and PIP windows.)
(Continued on the next page)
CATV cable
TO CONVERTER
(No connection to
TO CONVERTER)
Antenna cable
Installing the TV
AUX
Rear of TV
VHF/UHF
Rear of TV
13