Sony WEGA KV 20FV12 Operating Instructions Manual page 17

TV and Cable Box
Coaxial
Cable
1
From
cable
1
Connect the coaxial cable from your cable service to the IN jack on
your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
cable box to the VHF/UHF jack on the TV.
To view channels from your cable box, tune your TV to channel 3 or 4 (as set
on the rear panel of your cable box) and use the cable box's remote control to
change channels.
If you will be controlling all channel selection through your cable box, you
should consider using the Channel Fix feature, (see page 21).
Cable Box
Coaxial
2
Cable
Rear of TV
Connecting Your TV
5