Advertisement
Warning
Owner's Record
The model and serial numbers are located on the
bottom of the unit. Record the serial number in the
space provided below. Refer to them whenever you
call upon your dealer regarding this product.
Model No. DCZ-50P
Serial No.
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
This symbol is intended to alert the
user to the presence of uninsulated
"dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
* The graphical symbols are on the bottom enclosure.
Für Kunden in Deutschland
Dieses Produkt kann im kommerziellen und in
begrenztem Maße auch im industriellen Bereich
eingesetzt werden. Dies ist eine Einrichtung, welche
die Funk-Entstörung nach Klasse B besitzt.
VORSICHT
Um Feuergefahr und die Gefahr eines elektrischen
Schlages zu vermeiden, darf das Gerät weder Regen
noch Peuchtigkeit ausgesetzt werden.
WARNING
For the customers in the U.S.A.
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be required to
correct the interference at his own expense.
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
The shielded interface cable recommended in this
manual must be used with this equipment in order to
comply with the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
Precautions
Precautions
• Unplug this unit from the wall outlet when it is not
being used for a long period of time.
To disconnect the cord, pull it out by grasping the
plug. Never pull it out by the cord itself.
• The fluorescent lamps can get hot during operation.
Do not touch the lamps during operation and when
collapsing this unit.
• Clean the lens with an air spray or soft dry cloth,
taking care not to scratch it.
• Clean the cabinet with a soft cloth lightly moistened
with a mild detergent solution. Never use any type of
solvent such as alcohol or benzine, which might
damage the finish.
• When the fluorescent lamp flashes or gets
darkened, purchase a 4-watt fluorescent lamp
from your authorized dealer.
Features
The DCZ-50P Document Camera Stand is compactly
designed. It provides a high quality, high performance
display with very easy operation. It has the following
features.
• Built-in power zoom optical lens (×12)
• Focus, iris and white balance are adjusted
automatically after power on.
• By flipping the camera upwards through 90 degrees,
you can shoot materials pasted on the wall or even
yourself.
• Turning the power on/off automatically turns the
light on/off.
• Composite video output and S video output
• Both landscape and portrait A4 documents can be
placed on the stage.
• The unit can be collapsed so easily and weights so
little (4.1 kg (9 lb 1 oz)) that it can be carried with no
trouble.
Location and Function
of Controls
1
2
3
4
Right-side Panel
5
Left-side Panel
6
Rear Panel
7
8
9
1 Camera
The camera can flip upwards as much as 90 degrees.
2 Lens
The closeup lens is attached to the lens. To remove the
closeup lens, pull the knob (green) of the closeup lens.
3 Arm light
At power on, arm light automatically turns on.
4 Stage
Place the object on here. (Landscape/portrait A4/Letter
size document)
5 Power switch
6 Zoom switch
Sliding the switch to the end activates high speed
zooming and sliding the switch a short distance
activates slower zooming.
7 AC inlet
8 Composite video out connector (VIDEO OUT)
This connector supplies a 1.0 Vp-p, 75 Ω composite
video signal to a color monitor, projector or VCR.
9 S video output connector (S VIDEO OUT)
This connector supplies a 1.0 Vp-p, 75 Ω S video
signal to a color monitor, projector or VCR which has
an S video input connector.
Operation
At power on, this unit automatically turns on the arm
light, adjusts the focus, iris (brightness), and white
balance. The only thing to do now is to zoom the
image on the screen to display a normal document.
Zooming the Image on the Screen
To zoom into or out from the image on the display, use
the Zoom switch on the left-side panel. This unit offers
two levels of speed zooming. Slide the switch to the
end for high speed zooming and a shorter distance for
slower zooming.
To zoom out from the image for panoramic long shots,
slide the switch to the W (wide angle) side. To zoom
into the image for close-ups, slide the switch to the T
(telephoto) side.
Advertisement
