Table of Contents
Advertisement
Actiontec Wireless Cable/DSL Router User Manual
Restore Default Settings
To restore the Router to its factory default settings, select Restore Default
Settings from the "Utilities" screen. When the "Restore Default Settings" screen
appears, click Restore Default Settings. Any changes made to the Router's settings
will be lost and the factory default settings will be restored. During this process,
the Router's power LED flashes and the Router is disabled. When the power LED
stops flashing and glows steadily green, the Router is fully operational.
Upgrade Firmware
Selecting Upgrade Firmware in the "Utilities" screen generates the "Upgrade
Firmware" screen. Actiontec periodically posts firmware upgrades to enhance the
Router's capabilities.
To upgrade the Router's firmware, click the link in the "Upgrade Here" in the
Upgrade Firmware screen and follow the instructions. An Internet connection
must be established to upgrade the Router's firmware.
32
Advertisement
Table of Contents
