Customizing The Tv - Sony Trinitron KV-E29 Operating Instructions Manual

Customizing the TV

Using the AV OUT (advanced rec-out)
terminal
You can select the output signal from the MON/TV
OUT jacks at the rear of the TV. However, the signals of
the PROGRAM INDEX, STROBE, PIP modes, and the
Teletext broadcast (for KV-E29MH11/E29MN11 only)
cannot be output even though MONITOR is selected.
1
Press MENU.
2
Press V or v to move the cursor (z) to the
FEATURES menu (
ENTER
3
Press V or v to move the cursor (z) to AV
OUT, and press ENTER.
4
Press V/b/v/B to select the output signal,
and press ENTER.
Select To
TV Output the signal of the TV broadcast.
MONITOR Output the signal of the picture you are
watching as a main picture.
Note
• Do not change the channel while recording with a VCR
through the MON/TV OUT jacks. If you change the channel, it
also changes the channel you are recording.
28
-EN Operations
MENU A / V CONTROL
DYNAM I C
ST ANDARD
SOF T
PERSONAL
V I DEO AD J UST
AUD I O AD J UST
T I L T CORRECT:
), and press ENTER.
F E AT URES
GAME MODE
HYPER S URROUND :
ENTER
OF F
AV OUT :
MON I TOR
Adjusting the picture tilt
You can adjust the picture tilt if it is not aligned to the
TV screen. This may happen due to the direction of the
earth's magnetic fields in relation to the TV position.
1
Press MENU.
2
Make sure the cursor (z) appears in the A/V
CONTROL menu (
3
Press V or v to move the cursor (z) to TILT
CORRECT, and press ENTER.
4
Press V/b/v/B to select the most suitable
value to adjust the picture tilt, and press
ENTER.
TILT CORRECT:
–5 N –4 N –3 N –2 N –1 N 0 n +1 n +2 n +3 n+4 n +5
Press v/B
0
MENU A / V CONTROL
DYNAM I C
STANDARD
SOF T
PERSONAL
V I DEO AD J UST
AUD I O AD J UST
T I L T CORRECT:
), and press ENTER.
Press V/b
0