Table of Contents
Advertisement
Connecting to external Audio Equipment:
Plug in your Hi-Fi equipment to the audio output sockets D if you wish to amplify the audio
output from TV. Next ,using the menu system, select the "Sound Adjustment" menu. Enter to
the "Detail Adjustment" option and set "TV Speakers" to "Off".
Audio level of the external speakers can be modified by pressing the volume buttons on the
remote control. Also treble and bass settings can be modified through the "Sound
Adjustment" menu.
Using Optional Equipment
1
Connect your equipment to the designated TV socket, as indicated in the previous page.
2
Switch on the connected equipment.
3
To watch the picture of the connected equipment, press the
correct input symbol appears on the screen.
Symbol
Input Signals
• Audio / video input signal through the Scart connector C
1
• RGB input signal through the Scart connector C. This symbol appears only
if a RGB source has been connected.
• Audio / video input signal through the Scart connector E.
2
• S Video input signal through the Scart connector E.
2
S
• Video input signal through the phono socket A and Audio input signal
3
through B.
4
Press
button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select
signal using the instructions above. Finally, refer to the "Sound Adjustment" section of this
manual and select "Dual Sound" "A" on the sound menu screen.
button repeatedly until the
3 input
Additional Information
GB
19
Advertisement
Table of Contents
