Cleaning And Maintenance - Panasonic SR-PS508 Operating Instructions Manual

Cleaning and Maintenance

● Please wait until the main body is sufficiently cool before unplugging the power plug cleaning.
● When cleaning, never immerse the main body in water.
● Do not use the dish washer or dish dryer.
Do not use the following items:
• Wire wool or nylon brush
Tool with abrasive particles
on the surface.
Inner lid · Pressure valve (Inner lid)
Please remove it after every use, and clean it with a kitchen
dedicated neutral detergent.
(Also remove the pressure valve for cleaning.)
● Clean both sides of the inner lid removed, and dry water before
loading it into the outer lid.
Inner lid
■
During disassembly

Pull up the dissembling button of the inner lid.
(The inner lid will topple over toward the
front direction.)

Take out.
■
During installation
 Insert the lower end of the inner
lid into the slot.
 Push the upper end of the inner lid
to the button.
Precautions
● Please wash the pressure cooker immediately after using
seasonings (white rice with pork short ribs, etc.).
(So as to avoid odor, deterioration or rust.)
If the nozzle cap is clogged with foreign objects such as rice
and dirt, clear them using a thin bamboo stick or toothpick.
(So as not to cause steam leak and ejection of cooking food.)
Pressure valve
■
During disassembly

Rotate according to the
direction of the arrow.

Align the triangle on the
pressure valve to the
unlock mark, and you
can remove it.
■
During installation
 Place the pressure valve on the inner
lid, making the triangle align to the
unlock mark.
 Rotate to the triangle according to
the direction of the arrow till the lock
mark is aligned, and the installation is
complete when hearing a "click" sound.
※ Rinse it with water after removal.
22
• Benzine / Thinner
• Dish washer and
• Cleanser / Alcohol
dish dryer
• Disinfectant / Bleach
Slot
Seal ring
Support
section of the
pan handle
Dew collector
Remove it after use every time, and wash it
using detergent and then rinse it with water.
■
During disassembly
Take it out from the
support section of the
pan handle.
■
During installation

Insert the rib at the
rear end of the dew
collector into the
positioning groove.
 Press it into the main
body in according to
the direction of the
arrow, so that the
jaw at the front end
of the dew collector
may be fitted into the
main body (A "click" is heard).