Sony KV-21CE10K Operating Instructions Manual page 8

Switching on the TV and Automatically Tuning
5
After all available channels are captured and stored, the Programme
Sorting menu appears automatically on the screen enabling you to change
the order in which the channels appear on the screen.
a)
If you wish to keep the broadcast channels in their tuned order, press
MENU.
b)
If you wish to store the channels in a different order:
1 Press 2+/- to select the programme number with the channel (TV
Broadcast) you wish to rearrange, then press t.
2 Press 2+/- to select the new programme number position for your
selected channel (TV Broadcast), then press t.
3 Repeat steps b)1 and b)2 if you wish to change the order of the other
channels.
6
Because of the earth's magnetism, the picture might slant. The Picture
Rotation menu allows you to correct the picture slant if it is necessary.
a)
If it is not necessary, press t.
b)
If it is necessary, press 2+/- button to correct any slant of the picture.
Finally press t to store.
• To allow this menu to appear again, press and hold MENU button at top control panel for about 5
seconds.
• The MENU,
above.
Your TV is now ready for use.
8
First Time Operation
and , , , buttons on the remote control can also be used for the operations
V b v B
Programme Sorting
Programme:
01 TVE
02 TVE2
03 TV3
04 C33
Select channel
Select [ – 2+ ] Confirm [ t ]
Exit
Programme Sorting
Programme:
01 TVE
02 TVE2
03 TV3
04 C33 03 TV3
Select new position
Select [ – 2+ ] Confirm [ t ]
Exit
Picture Rotation
[ 2+ ]
[ – 2 ]
Select [ – 2+ ] Confirm [ t ] End