Table of Contents
Advertisement
GLOSSARY
Air delivery regulator: Union allowing regulation of the air flow.
Beading: Operation which takes place during inflation and ensures perfect centring between the
bead and the rim edge.
Bead breaking: Operation in which the bead of the tyre is detached from the edge of the rim.
Bead pressing gripper: A tool intended for use when mounting the top bead. It is fitted so that it
grips the shoulder of the rim and holds the tyre top bead inside the drop centre. It is generally used
for mounting low profile tyres.
Tubeless Inflator: An inflation system which simplifies inflating tubeless tyres.
TROUBLE SHOOTING
CAUTION
In case of unexpected failure, electrically insulate the machine by means of an omnipolar discon-
nection device.
Turntable not turning
Feeding plug not connected or defective.
- Check the plug.
Machine not powered.
- Restore the electric connections.
Defective inverter.
- Replace the inverter (skilled staff needed in this case).
Motor shorted.
Replace the motor (skilled staff needed in this case).
Belt broken.
• Replace belt.
Rotation control pedal fails to return to central position
Control spring broken.
• Replace the control spring.
Bead breaking unit not working
No vertical movement.
• Check for folded hoses.
• Check ascent and descent valve operation.
Bead breaking unit is underpowered, does not break the bead and is
leaking air
Carry out the checks in the previous point: "Bead breaking unit not working".
Cylinder gaskets worn.
• Replace gaskets.
• Replace bead breaker cylinder.
Bead breaker cylinder leaks air around the rod
Air gaskets worn.
• Replace gaskets.
• Replace bead breaker cylinder.
Gear unit noisy. The table top makes 1/3 of a spin and then stops
Gear unit seizing.
• Replace gear unit.
User Manual
51
Advertisement
Table of Contents
