Table of Contents
Advertisement
To prevent any rim damage, the plastic insert under the head (fig. 13) must be replaced every 2
months or sooner, if excessively worn. A spare insert is supplied with the machine.
Any noise heard when the tool head engages with the tyre is normal. The noise is caused by the
mechanical return of the tool and not because the tool has hit the rim. Even if the tool does touch
the rim as the tyre is engaged, this will not damage the rim in any way. The pressure applied is very
low. If you wish to prevent this noise, simply press the bead breaker disc harder against the bead
when picking it up.
CORRECT USE OF THE TYRE CHANGER
WARNING
Read the "PRACTICAL HINTS, ADVICE AND USEFUL INFORMATION" section above with great care.
WARNING
BEFORE STARTING THE DEMOUNTING OPERATION, MAKE SURE THE MACHINE IS SET
WITH THE COLUMN WORKING ARM LATERALLY TILTED AND THE DUAL-POSITION BEAD
BREAKER SUPPORT NOT LOCKED.
1 • Wheel lifting (fig. 14-14a)
- Place the wheel on the lifter
- Lift the wheel operating on pedal 29
30
Advice
Information
GUIDE TO THE
TYRE DEMOUNTING
13
User manual
Advertisement
Table of Contents
