Manual Programme Preset - Sony FD Trinitron KV-29XL70K Operating Instructions Manual

Level 1
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset

Manual Programme Preset

Detail Set Up
OK
Introducing and Using the Menu System
Level 2 Level 3 / Function
MANUAL PROGRAMME PRESET
The "Manual Programme Preset" option in the "Set
Up" menu allows you to:
a)
To do this:
1 After selecting the "Manual Programme Preset"
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
2
3 After selecting the Channel option, press the b
b)
To do this:
Preset channels or the VCR channel one by one
to the programme order of your choice.
option, press the b button then with Programme
option highlighted press the b button.
Press the v or V buttons to select which
programme number you want to preset the
channel to (for VCR, select programme number
"0"). Then press the B button.
The availability of this option depends on
the country you have selected in the
"Language/Country" menu.
After selecting the System option, press the b
button. Then press the v or V buttons to select the
TV Broadcast system (B/G for western European
countries or D/K for eastern European countries).
Press the B button.
button. Then press the v or V buttons to select the
channel tuning ("C" for terrestrial channels or "S"
for cable channels). Next press b button. After
that, press the numbered buttons to directly enter
the channel number of the TV Broadcast or the
VCR channel. If you do not know the channel
number, press the v or V buttons to search for it.
When you have tuned to the desired channel,
press the OK button twice to store.
Repeat all the above steps to tune and store more
channels.
Label a channel using up to five characters.
After highlighting the Programme option, press
the PROG +/- button to select the programme
number of the channel you wish to name. When
the programme you want to name appears on the
screen, select the Label option and press b
button. Next press the v or V buttons to select a
letter, number or "-" for a blank. Press the b button
to confirm thecharacter. Select the other four
characters in the same way. After selecting all the
characters, press the OK button twice to store.
continued...
13
Menu System
GB