INSTALL REFRIGERATOR
FIG. 3
Mounting Rail
CONNECT UTILITIES
1. C onnect water (if applicable) and electric ser-
vices to refrigerator.
S ee Installation Instructions (included with
refrigerator) for complete instructions.
2. ALWAYS use a backup wrench
when loosening or tightening LP gas connec-
tions.
Connect LP gas service.
S ee Installation Instructions (included with
refrigerator) for complete instructions.
a. If RV LP gas line is long enough to reach
LP gas valve on refrigerator, skip to section
"Finish Installation" on page (6).
G as line extension is NOT needed if
existing RV LP gas line is long enough.
b. If RV LP gas line does not reach LP gas
valve on refrigerator, proceed to step (c).
c. Connect gas line extension to RV LP gas
line. See (FIG. 5) & (FIG. 6).
● Place and tighten 3/8" flare nipple (pro-
vided with gas line extension) into flare
nut of RV LP gas line.
FIG. 5
LP Gas Line
(From RV)
3" Screw
Gas Line
Extension
3/8" Flare
Nipple
FIG. 4
3" Screw
FIG. 6
Backup
Wrench
3/8" Flare
Nipple
d. Connect gas line extension to LP gas valve
on refrigerator. See (FIG. 7).
I t may be necessary to loop gas line
extension.
● Place and tighten flare nut of gas line ex-
tension (provided) onto 3/8" male flare
end of refrigerator LP gas valve.
FIG. 7
LP gas valve
Gas Line Extension
(Shown Looped)
5
Base Cover
Gas Line
Extension
Line
Wrench
Backup
Wrench
Line
Wrench