Av2 Output; Rgb Centring; Picture Rotation - Sony FD Trinitron KV-24LS35U Instruction Manual

03GBKV24LS35U.fm Page 16 Friday, September 21, 2001 12:23 PM
Level 1
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
If you select "AUTO", the output signal will always be the same one that is displayed on
the screen.
If you have connected a decoder to the Scart
please remember to change back the "AV2 Output" to "AUTO" or "TV" for correct
unscrambling.
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
16
Menu System
Level 2 Level 3 / Function

AV2 OUTPUT

The "AV2 Output" option in the "Detail Set Up"
menu allows you to select the source to be
output from the Scart connector
can record from this Scart any signal coming
from the TV or from external equipment
connected to the Scart connector
Detail Set Up
Auto Format
On
Noise Reduction: front connectors
Auto
AV2 Output:
TV

RGB Centring:

0

Picture Rotation:

0
OK
To do this: after selecting the option, press
Then press
output signal: TV, AV1, AV3, YC3 or AUTO.
:2/q
RGB CENTRING
When connecting an RGB source, such as a
"PlayStation", you may need to readjust the
horizontal position of the picture. In that case,
you can readjust it through the "RGB Centring"
option in the "Detail Set Up".
Detail Set Up
Auto Format On
To do this: while watching an RGB source select
Noise Reduction:
Auto
AV2 Output: TV
RGB Centring: 0
the "RGB Centring" option and press
Picture Rotation: 0
press
OK
picture between –10 and +10. Finally press OK
to confirm and store.
PICTURE ROTATION
Because of the earth's magnetism, the picture
might slant. In this case, you can correct the
picture slant by using the option "Picture
Rotation" in the "Detail Set Up" menu.
To do this: after selecting the option, press
Detail Set Up
Auto Format On
Then press
Noise Reduction: Auto
AV2 Output: TV
RGB Centring: 0
picture between -5 and +5 and finally press OK
Picture Rotation:
0
to store.
OK
:2/q
3 and 3.
If your VCR supports Smartlink, this
procedure is not necessary.
or to select the desired
or to a VCR connected to this Scart,
or to adjust the centre of the
or to correct any slant of the
. You
:1/
or
.
. Then
.