Samsung HABANA-C NT-R45 Series Service Manual page 57

- This document cannot be used without the authorization of Samsung-
4. Disassembly and Reassembly
Part
LCD
Ass'y
Figure
8. Remove the screws indicated by the arrows
in the figure and remove the antenna wire.
* Caution
Remove the wire keeping an eye on the hook
on the LCD Back.
9. Remove the screws indicated by the arrows
in the figure and lift up the LCD Bracket Upper.
10. Remove the spring in the circle on the
picture, then lift the Knob Latch up to separate
the LCD Back.
11. Remove the screws indicated by the arrows
in the figure so as to separate the left LCD
Bracket.
12. Remove the screws indicated by the arrows
in the figure to separate the right LCD Bracket.
4-10
Description