Download Print this page

Samsung HABANA-C NT-R45 Series Service Manual page 49

Advertisement

- This document cannot be used without the authorization of Samsung -
4. Disassembly and Reassembly
Part
5
4
Main
System
1
Figure
3
2
2
3
7. When removing the HDD compartment cover,
you will find the HDD. Separate the HDD cable
and lift up the HDD at an angle of 70º as
shown in the figure.
(To separate the HDD cable, lift up the cable
connector.)
*Caution
Do not lift the HDD up using excessive force.
Make sure to remove the HDD before turning
over the system.
8.
1) Lift right side first
2) Separate Cap-Top lower side to 2 of 3
3) Separate right Hinge Cap
4) Separate Cap-Top lower side fully
1
5) Separate left Hinge Cap
Caution : Be careful to happen scratch on LCD-
Front because of excessive force when you
disassemble Hinge-Cap area.
9. You have to unlock 3 hooks in the order of 1,
2 and 3 to remove the keyboard as shown in
the figure.
10. Push the hooks inwards using tweezers as
the figure shows and lift up the keyboard.
*Caution
Avoid scratching the Top when pushing the
hook with the tweezers.
4-2
Description

Advertisement

loading

This manual is also suitable for:

R45