Sony SPP-A9276 Operating Instructions Manual page 49

3
Press Jog Dial again (or Jog Button (ENTER)).
4
Turn Jog Dial to choose "SEND DIRECTORY",
and then press Jog Dial (or Jog Button
(ENTER)).
"SENDING..." appears on the display during
the transfer.
You hear a long confirmation beep and the
entire memory is transferred.
Notes
• If there are already 50 numbers stored in the Phone Directory receiving the
transferred number one by one from the other Phone Directory, "CORDLESS
HANDSET MEMORY IS FULL." or "BASEPHONE MEMORY IS FULL."
will appear on the display and five short error beeps will be heard to indicate
that the transfer was unsuccessful. To make the transfer possible, erase one of
the stored phone numbers existing in the Phone Directory (see page 45).
• If the transfer is unsuccessful, "SEND TO CORDLESS HANDSET
FAILED." or "SEND TO BASEPHONE FAILED." will appear on the
display, and five short error beeps will be heard. Move the cordless handset
closer to the base phone, and then start over the procedure.
(Cordless handset)
SEND ALL DIR?
GO BACK
NO
SEND DIRECTORY
(BASE OVERWRITE)
Telephone Features
49 US