Mounting Option; Support Information - ActionTec ScreenBeam 1000 EDU Quick Start Manual

quick start guide
H. Mounting Option
The ScreenBeam 1000 EDU supports a variety of mounting
options. Please visit the product support website for the most
updated information.
I. Expectations and Known Issues
Wi-Fi Internet is limited when connecting to ScreenBeam local
z
Wi-Fi unless ScreenBeam is connected to the network and
bridge mode is enabled.
If ScreenBeam is connected to the existing network, some
z
existing access points and or controllers (i.e. Meraki or Cisco)
may flag it as a rogue AP and restrict the client from connecting.
Consult with the network administrator to flag ScreenBeam as a
friendly access point.
Windows 10 build 1803 (and earlier) do not support wireless
z
display PIN on Miracast over LAN. The connection will fall back
to establishing the Miracast over Wi-Fi Direct path.

Support Information

For FAQs, troubleshooting tips and support, visit:
https://support.screenbeam.com
To open a ticket for support, visit:
https://support.screenbeam.com/ticket
Website: www.screenbeam.com
PN: 0530-0844-000
© 2019 All rights reserved. Actiontec and the Actiontec logo are registered trademarks,
and ScreenBeam is a trademark of Actiontec Electronics, Inc. All other names are
properties of their respective owners. Specifications subject to change without notice.
052219
https://support.screenbeam.com/1000