ActionTec ScreenBeam 1100 Quick Start Manual
  1. Manuals
  2. Brands
  3. ActionTec Manuals
  4. Receiver
  5. ScreenBeam 1100
  6. Quick start manual

ActionTec ScreenBeam 1100 Quick Start Manual

Wireless display receiver
Hide thumbs Also See for ScreenBeam 1100:
Table of Contents

Advertisement

Quick Links

Download this manual

quick start guide

ScreenBeam 1100
Wireless Display Receiver
Quick Start Guide
This Quick Start Guide provides the instructions on how to install the ScreenBeam
1100 receiver, connect client devices, and setup for deployment.
Before Beginning Deployment
Before deploying Actiontec ScreenBeam products, check for the latest firmware,
release documentation and tech tips.
For ScreenBeam receiver's deployment guide, firmware upgrades, and release
z
notes, go to:
https://support.screenbeam.com/1100
For Miracast
or native macOS/iOS wireless display connection tutorial, go to:
™
z
https://www.screenbeam.com/setup
For ScreenBeam Central Management System (CMS) software, go to:
z
https://support.screenbeam.com/cms
For Open Source information, go to:
z

Package Contents

ScreenBeam 1100 receiver
z
Power supply
z
HDMI cable
z
1 |
screenbeam.com
https://opensource.actiontec.com
Quick Start Guide (this document)
z
Regulatory documents
z
ScreenBeam
Documentation
For FAQs, troubleshooting tips
and support, visit:
https://support.screenbeam.com
Need Help?
To open a ticket for support, visit:
https://support.screenbeam.com/ticket
1100
|
™

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ScreenBeam 1100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ActionTec ScreenBeam 1100

Summary of Contents for ActionTec ScreenBeam 1100

  • Page 1: Quick Start Guide

    This Quick Start Guide provides the instructions on how to install the ScreenBeam 1100 receiver, connect client devices, and setup for deployment. Before Beginning Deployment Documentation Before deploying Actiontec ScreenBeam products, check for the latest firmware, release documentation and tech tips. For FAQs, troubleshooting tips and support, visit: For ScreenBeam receiver’s deployment guide, firmware upgrades, and release...
  • Page 2 Android device to wirelessly display without of network for client devices to connect and project. In this requiring any apps. ScreenBeam 1100 offers a variety of mode, user needs to connect the client device Wi-Fi to the secured network modes to support connection from the ScreenBeam Wi-Fi and then select the receiver to mirror.
  • Page 3 Wireless Display over existing LAN The Wi-Fi Miracast mode allows compatible Wi-Fi Miracast ScreenBeam 1100 can be connected to the existing wireless or devices to connect directly to ScreenBeam, even when wired network and supports wireless display for client devices connected to an infrastructure wireless network.

  • Page 4: Minimum Requirements

    Client device from 2015 or newer with one of the following Setup Requirements operating systems: Windows 10 build 1709 (and later) ScreenBeam 1100 receiver macOS X 10.10 (and later) Display with an available HDMI input iOS 11 (and later) (Optional) Touchscreen with USB touch cable Android 4.4 (and later) with Miracast...

  • Page 5: Set Up Network Connection

    ScreenBeam can be connected to Power the network via wired or Wi-Fi connection. Figure 4 ScreenBeam 1100 setup Wired Connection Place the receiver next to the display. If ScreenBeam is connected to a DHCP-enabled network, the...
  • Page 6 quick start guide C. Connect Client Device If the display has touch functionality, Windows 10 devices can take advantage of the touch and inking feature by This section provides the instructions on how to connect to selecting Allow touch…. (Refer to section F for more ScreenBeam using the native screen mirroring from the most details.) common operating systems.
  • Page 7 D. Configure ScreenBeam Receiver Connect Using the Existing Wireless Network or LAN ScreenBeam 1100 can be configured by using the Connect the ScreenBeam receiver to a known network ScreenBeam CMS software or accessing the ScreenBeam’s where your client device can communicate over Wi-Fi.
  • Page 8 Edge/IE browser: click Details, then Go on to the webpage (not recommended). Firefox browser: click Advanced, then click Add Exception, then click Confirm Security Exception. When the ScreenBeam management page appears, enter the Username Administrator and Password Actiontec (both case-sensitive). screenbeam.com...

  • Page 9: Power Management

    ScreenBeam 1100 ™ E. Customize ScreenBeam Settings Select Random or Static for PIN code generation. If Static, then enter PIN of choice. Keep note of the new PIN for user distribution. Under the Device Configuration Page Note: For eight-digit PIN option, only the first seven digits Assign new Device Name of the PIN can be set in configuration;...

  • Page 10: Supported Features

    CPU: 5th Gen Intel Core i-Series 5xxx or AMD equivalent Setup and Instructions (or better) RAM: 4 GB or more Connect the USB Type-A end to the ScreenBeam 1100 receiver’s USB port. Setup Requirements Connect the USB Type-B/A end to the USB Touch input on the display or projector.

  • Page 11: Support Information

    Please read the deployment guide for best practices and tips Wi-Fi Internet is limited when connecting to ScreenBeam before placing the ScreenBeam 1100 to the site for users. local Wi-Fi unless ScreenBeam is connected to the network and bridge mode is enabled.
  • Page 12 ™ PN: 0530-0838-000 © 2019 All rights reserved. Actiontec and the Actiontec logo are registered trademarks, and ScreenBeam is a trademark of Actiontec Electronics, Inc. All other names are properties of their respective owners. Specifications subject to change without notice.

Table of Contents