Picking Up New Messages - Sony PP-A2780 Operating Instructions Manual

Picking up new messages

1
Call your phone from a touch-tone phone.
2
While you hear your greeting play, press (#). The greeting
stops.
After confirming the greeting stops, enter your remote ID
code (security code). You hear a long confirmation beep.
Following the voice guidance informing you of the number
of messages recorded, the phone stands by for you to enter a
control code.
3
To do other operations, enter the control code within 20
seconds (see the table below). To quit, hang up the phone.
Control codes for remote operations
To
Play back messages
Repeat the current message
Skip the current message
Erase the current message
Erase all messages
Record a new greeting
(up to one minute)
Turn on the answering function
Turn off the answering function
Stop the current operation
If you forgot to turn the answering function on
Call your phone and let it ring 10 times until it answers. Then do steps
2 and 3 above. The control code for turning on the answering function
is (*) and (0).
Note
If you enter a wrong remote security code three times, the line will be
disconnected.
To use the toll-saver feature
Set "RINGER TIMES" to "TOLL SAVER". See page 62 for details.
Press
(#) (2)
(#) (1) while the message is being played back
(#) (3) while the message is being played back
(#) (9) while the message is being played back
(#) (9)
(*) (7). When you hear a long beep, start recording your
greeting. Press (*) (*) to stop recording.
(*) (0)
(#) (0)
(*) (*)
Answering Machine Features
75 US