Identifying Parts And Controls - Sony SDM-P234 Operating Instructions Manual

Identifying parts and controls

See the pages in parentheses for further details.
Front of the LCD display
1
This display employs a touch sensor key system. You can operate
the display by touching the letters or symbols on the front panel.
Touch sensor keys work only when they are lit. Touch sensor keys
light up when you turn the monitor on, but they turn off if you do
not perform any operations for a while. To light them up again,
touch an area of the touch sensor keys.
Note
Do not press the touch sensor keys too hard. This may cause a
malfunction.
2
MENU
OK
INPUT
ECO
3
MENU
4
5
OK
6
INPUT
7
ECO
8
A Sony logo (page 18)
Sony logo illuminates.
B 1 (Power) (pages 9, 19, 24)
This key turns the monitor on when the key lights up in red.
To turn the monitor off, touch this key again.
If the key does not light up, press the MAIN POWER switch
(9).
C MENU (page 12)
This key turns the menu screen on and off.
D m/M (page 12)
These keys are used to select the menu items and make
adjustments.
E OK (pages 12, 14)
This key activates the selected menu item and adjustments
made using m/M (4).
When the menu screen is not displayed, with this key you can
make automatic adjustment of the picture quality for the
current input signal (one touch sensing function).
F INPUT (page 11)
This key switches the video input signal between INPUT1,
INPUT2 and INPUT3 when multiple computers are
connected to the monitor.
G ECO (page 19)
This key is used to reduce the power consumption.
H Light sensor (page 19)
This sensor measures the brightness of the surrounding area.
Be sure not to cover the sensor with papers, etc.
Rear of the display stand
9
I MAIN POWER switch (page 9)
This switch turns the monitor's main power on and off.
J Back cover (page 7)
Slide up this cover when you connect cables or cords.
GB
0
5