Installing mounting plate in cabinet
280mm
Mark a centerline (A) along the base
1
of the cabinet.
Measure 357mm from the front edge
2
of the cabinet and mark a line (B)
across the centreline.
Measure 10mm along line (B) from
3
the centreline towards the left and
mark a screw hole (C).
Measure 36mm along line (B) from
4
the centreline towards the right and
mark a screw hole (D).
Place the mounting plate (E) aligning
5
its screw holes with the screw hole
locations on the cabinet base.
Fix the mounting plate with supplied
6
screws (F) to the screw holes.
12
INSTALLATION GUIDE
d
b c
A
Front edge
280mm
560mm
TOP VIEW
10mm
36mm
Cabinet base
E
f