Table of Contents
Advertisement
IMPORTANT!
The oven is fitted with a plug and must only be connected to a properly installed
●
●
earthed socket. The socket must only be installed and the connecting cable
must only be replaced by a qualified electrician, and in accordance with the
appropriate regulations.
If the plug is no longer accessible following installation, an all-pole isolating switch
●
●
must be present on the installation side with a contact gap of at least 3mm.
The fitted cabinet must not have a back wall behind the appliance.
●
●
A gap must be maintained between the wall and the base of the unit above.
●
●
Specific gap size could be referenced by the diagrams.
Minimum installation height: 85cm (for OM25BLCX1 model only)
●
●
Do not cover ventilation slots and suction holes.
●
●
Do not trap or bend the power cable
●
●
c
CABINETRY DIMENSIONS
Overall width of cavity
A
Inside width of cavity
b
Inside height of cavity
c
Depth of cavity
d
Clearance from wall
e
INSTALLATION GUIDE
A
b
Front view
OM25BLSB1/OM25BLSX1
e
d
Side view
mm
600
min 560
min 380
min 500
45
OM25BLCX1
mm
600
min 560
min 450
550
45
11
Hide quick links:
Advertisement
Table of Contents
