Honeywell 6500 Dolphin Introduction Manual page 8

‐ Walkthrough: Panatrack Verify Order Basics
o Description: This is where you'll be checking the picked orders and then packing them to be shipped.
Once you have finished checking an order, a packing slip and Certificate of Analysis (COA) will be
printed out for you to affix to the shipping box.
o Navigating to Verify Order: Main Menu ‐> Inventory ‐> Orders ‐> Verify Order
o Verify Order main screen will pop up. Here is a walkthrough of the various fields:






‐ Packing with Verify Order:
1. Go to the staging bins and pick out a bin that contains a picking ticket and its order items.
2. Do a quick item count between the items on the picking ticket and the number of physical items present.
a. If there is a discrepancy, this could be 1 of 3 issues:
i. Order was not picked correctly: For example, a picker may have told Fulfill Order he/she picked
2 of a certain item but only actually placed 1 in the staging bin. Talk with the picking team and
bring up that the order may have had a mis‐pick.
ii. Order has a FORM5: Look for a F5 or FORM5 written on the ticket, indicating that item is a
FORM5.
iii. Rest of the Order is in another staging bin: Sometimes orders are so big they cannot fit into one
staging bin, check the picking ticket to see which Staging bin numbers were written down
3. Once all items are gathered for the order, bring items and picking ticket to your packing station
4. Determine what type of shipping box and plastic bags you will need to pack the order. Assemble shipping box as
needed.
5. Start up the handheld/login into Panatrack.
6. Navigate to Verify Order in Panatrack, highlight the "Order" field and scan the picking ticket's barcode to bring
up the order#.
7. Highlight the "Printer" field, scan the barcode at your Packing Station's printer to select which printer your
packing slip will print to.
8. Highlight the "Item" field. Pick up one of the items from the order and either scan the QR code on the item label
or manually enter in the item#
9. If item was scanned in, just enter Quantity: 1 and hit "ENT←" on the keypad (green bu on on right side)
a. If you required manual input of the item#, select the "Lot" field button on the screen, it will pull up a
drop down menu of the lot# to be packed. Click it with your finger/stylus and press "SELECT" at the
bottom of the drop down menu to load the Lot# into the "Lot" field. Then enter Quantity: 1 and press
"ENT←" on the keypad.
Site Filter: The 935 warehouse is selected as the default site
Order: This field is where you can scan the picking ticket's ORD# barcode to bring up the
order number
Printer: This is where you can scan the Printer's barcode at your Packing Station to specify
where your packing slip will print out from, THIS IS REQUIRED TO BE FILLED OUT
Item: This is where you check the item that you are packing. This field is where you can
enter in the item# (catalog#‐size) or scan the 2D QR code on the item label to bring up the
item information
Lot: This is the field where you can select the lot# of the item that needs to be packed
Quantity: This is the field where you select the quantity of that item that needs to be
packed.
1. Check the FORM5 staging bins to see if the item is ready (look for the FORM5 staging bin
that corresponds to the FORM5 item's Catalog#), if so, go into Fulfill Order and complete
the pick/submit the transaction before verifying the order/packing.
2. If the FORM5 item is not ready yet, place the order items and picking ticket back in its
original staging bin.