Table of Contents
Advertisement
DSS User Interface
4–2
Configuring the interface
Switch on the 24V supply of the system.
L
Switch on the PC. Wait until the operating system has been fully booted and
L
start the "DSS" commissioning and service system. The "Establish connec-
tion" dialog is automatically displayed:
This dialog may also be invoked manually when the connection has been
successfully established:
D menu sequence EXTRAS " INTERFACE SELECT
-or-
D by clicking on the
in the DSS basic image.
in the "Primary connection" field (1): V.24 connection (ASM)
L
Set the data in the "Interface Preferences" field (2) through the following dia-
L
log:
Click on "OK" to return to the "Establish connection" dialog.
Clicking on "OK" in this dialog will cause the DSS to try to establish the de-
L
sired connection.
D In the event of a fault, the "Status" field (3) will contain more information.
Check the connection between the PC and the drive and then click on the
"Retry" command button.
D If the connection can be established, the DSS will read information from
the drive and then display the DSS basic image.
(1)
(2)
(3)
command button " INTERFACE SELECT
1070 066 028-101 (01.05) GB
Hide quick links:
Advertisement
Table of Contents
