Sony LUMA Professional LCD Monitor Catalog page 9

LMD-2030W Connector Panel
LMD-1420 Connector Panel
LMD-1410 Connector Panel
High Picture Performance
High Purity Color Filters
The entry-level one-piece type LUMA monitors come
equipped with high-purity RGB color filters, allowing the
reproduction of colors with stunning depth and saturation.
Excellent Brightness and Contrast
The entry-level one-piece type LUMA monitors provide high-
brightness, high-contrast images.
Wide Viewing Angle
The LCD panels used in the entry-level one-piece type LUMA
monitors provide a wide viewing angle of 178 degrees for the
LMD-2030W, and 170 degrees for the LMD-1420 and
LMD-1410, both horizontally and vertically, with minimal
reduction in picture contrast. This allows images to be
viewed from various positions and angles.
Operational Convenience
Advanced Marker Settings
The LMD-2030W and LMD-1420 can display various area
markers, including a center marker and aspect markers.
The brightness of these markers can be selected from three
different levels: white, gray, and dark gray. Users can also
select either a black or gray matte to fill the outer area of the
aspect markers. These flexible marker controls, together with
the choice of many different aspect markers, make these
monitors extremely convenient display devices for a variety of
shooting scenarios.
Entry-level One-piece Type
Marker Variation
Color Temperature
The color temperature can be selected as 'high', 'low', or user preset.
Selectable Scan Size for Video Input and Aspect Ratio
The scan size can be selected between 5% over-scan and -3%
underscan modes. The aspect ratio can be switched between
16:9 and 4:3 according to the input signal.
Three-color Tally
The LMD-2030W and LMD-1420 come equipped with a tally
lamp that can be lit via a parallel remote connector.
The status of the signal displayed on the monitor can be
identified by the tally color - red, green, or amber.
Parallel Remote Control
The entry-level one-piece type LUMA monitors can be
controlled remotely via their parallel remote connectors. In
the remote menu, there are 17 functions for the LMD-2030W
and 25 for the LMD-1420 and LMD-1410 (such as the ability
to switch input signals), of which seven can be allocated to
the remote connector.
Monaural Audio Monitoring
All entry-level one-piece type LUMA monitors are equipped with
a speaker (0.5 W), which enables the user to monitor audio.
Protected Controls
The key-inhibit function helps prevent inadvertent operation
from the control panel.
Convenient Installation
Mounting Flexibility
Mountable in a 19-inch EIA Standard Rack (LMD-2030W)
All entry-level one-piece type LUMA monitors can be mounted
in a 19-inch EIA standard rack using optional mounting brackets.
The 9U-high LMD-2030W uses the MB-529 Mounting Brackets,
and the 7U-high LMD-1420 and LMD-1410 use the MB-526
Mounting Brackets.
VESA Mounting
Complying with VESA standards, these monitors can easily be
mounted (100 x 100 mm pitch) on a wall or ceiling.
Other Features
• Setup Level for Analog Component and NTSC signals
• Blue-Only Mode (LMD-2030W and LMD-1420 only)
• External Sync IN (LMD-2030W and LMD-1420 only)
• 4:3 Zoom (LMD-1420 only)
9