Adjusting The Brightness And Contrast - Sony Trinitron GDM-FW900 Operating Instructions Manual

x Using the joystick
1
Display the main MENU and select the menu you
want to adjust.
Press the joystick once to display the main MENU. Then
move the joystick up, down, left, or right to highlight the
desired menu. Press the joystick to select the menu item.
b
2
Adjust the menu.
Move the joystick up, down, left, or right to make the
adjustment.
3
Close the menu.
Press the joystick once to return to the main menu, and twice
to return to normal viewing. If no buttons are pressed, the
menu closes automatically after about 30 seconds.
x Resetting the adjustments
Press the RESET button. See page 16 for more information on
resetting the adjustments.
RESET
Adjusting the brightness and
contrast
Brightness and contrast adjustments are made using a separate
BRIGHTNESS/CONTRAST menu.
These settings are stored in memory for the signals from the
currently selected input connector.
1
b
2
If you select the sRGB mode in the COLOR menu
Confirm that the brightness (
adjusted respectively to the numbers to be set in the sRGB mode
shown in the BRIGHTNESS/CONTRAST menu. If not, press the
RESET button (for less than 2 seconds).
For more information about using the sRGB mode, see
"Adjusting the color of the picture (COLOR)" on page 12.
The menu automatically disappears after about 3 seconds.
Move the joystick in any direction.
The BRIGHTNESS/CONTRAST menu appears on the
screen.
BR I GHTNESS / CONTRAS T
2 6
Move the joystick up or down to adjust the
brightness ( ), and left or right to adjust the
contrast (6).
) and contrast (6) values are
BR I GHTNESS / CONTRAS T
5 6
s RGB : 5 6
2 6
Values to be set
7 6
in the sRGB
mode
7 6
11
GB