Table of Contents
Advertisement
Information
If the seam pattern is straight, you only have to set the left seam secure-
ment. The setting for the right needle is adopted.
Information
The settings in subitem Securement seam beginning right
needle are adopted automatically from the settings for the Securement
seam beginning left needle ( p. 83).
The display switches to Securement seam end left needle.
Fig. 62: Set securement seam end left needle
84
Set securement seam beginning right needle
Set securement seam end left needle
Operating Instructions 745-35-10 D - 00.0 - 04/2017
Programming
Advertisement
Table of Contents
