Copy Quality Checks - Ricoh Pro C900 Installation Manual

Copy Quality Checks

During the following copy quality checks write the final measurements or
SP mode values on each check sample. Do not throw these check
samples out. All copy quality check samples will remain with the
machine for future reference.
•
•
•
•
•
•
•
•
Colour High Volume Production System - Installation Guide
Pro C900
Scan Image Adjustment (Pro C900s Only):
Scanner sub-scan magnification
o
Scanner leading edge and side-to- side adjustment
o
ADF leading edge and side-to-side adjustment.
o
Perform the Colour Image Check procedure using the PS Test
Page.
Colour Registration Check: Check that the grid lines superimpose
on top of one another. The cyan, yellow and magenta main-scan
and sub-scan lines should not deviate from the black main-scan
and sub-scan lines by more than 120µm.
Note: To print the 20mm grid pattern make sure that you print
from a PC using a file that contains black, red, green and blue
print data.
Ruled line check
Image shift check between Page 1 and 2
Image skew check
Print the print quality (PQ) check file twice: One of the PQ check
samples will be kept with the machine to determine if a copy
quality issue is a machine specification or machine failure. The
other PQ check sample will be returned to the Technical Product
Manager at National Technical Support.
This file can be downloaded from the Technical Website/
Documents/ Pro C900 - Pro C900s / Installation Documents
section. Please use the following link;
http://partners.ricoh.com.au/web/aubase/technical/documents.nsf
/allbymodel/48E0E2592AA4E8F2CA2575D00080B081?OpenDocum
ent
This PQ Check file sample will be the machine's standard
o
.When there is a print quality issue, please print the PQ
check file. Then compare with the standard PQ check file
It is important to use the same media type, media
o
thickness, print settings and the same Fiery Controller
settings that were used at installation.
Print and complete the PQ check file information sheet and keep
one copy of this document with the machine and return the
original to the Technical Product Manager at National Technical
Support. This information sheet will detail the media and tray
settings used to print the PQ check file.
This file can be downloaded from the Technical Website/
Documents /Pro C900 - Pro C900s / Installation Documents
section. Please use the following link;
http://partners.ricoh.com.au/web/aubase/technical/documents.nsf
/allbymodel/2B8E36F6D78F31DFCA2575D00080F17E?OpenDocum
ent
Page 19 of 24