Finishing; Faceplate; Upper Grill Installation; Keystone Installation - Napoleon High Country 6000 Series Installation And Operation Manual

! WARNING
• Use only a non-combustible material to fi nish the face of the appliance. A non-combustible material such as
cement board is required for this purpose.
• Ventilation openings are required in enclosures up to 96" (243.8cm) high. They are recommended for all
enclosures.
• Above 84" (213.4cm), combustible fi nishing materials may be used on the front face.
• Do not insulate around the appliance.
7.1

faceplate

A.
Remove the facing template held in place with
the 12 screws shown.
B.
Discard the screws and template.
7.2

upper grill installation

A.
Mount the keystone and upper grill to
the faceplate as shown, using the 4 nuts
supplied.
B.
Remove the backing and place logo onto the
bottom left corner of the faceplate.
tip:
Record your serial number in the manual for quick
future reference.
7.3

keystone installation

A.
Secure the faceplate to the appliance, using
the 12 screws supplied.
B.
Start all 12 screws, then tighten evenly.
7.0 fi nishing
Logo
Placement
25
W415-1501 / E / 12.17.18
EN