Framing - Napoleon High Country 6000 Series Installation And Operation Manual

!
WARNING
• In order to avoid the possibility of exposed insulation or vapour barrier coming in contact with the appliance
body, it is recommended that the walls of the appliance enclosure be "fi nished" (i.e. drywall/sheetrock), as you
would fi nish any other outside wall of a home. This will ensure that clearance to combustibles is maintained
within the cavity.
• A minimum of 6" (152mm) to combustible materials is required to both sides of the appliance (see "minimum
clearance to combustibles" section).
• Do not pack required air spaces with insulation or other materials.
• Do not build shelves or cupboards into the area above the appliance.
• Objects placed in front of the appliance must be kept a minimum of 48" (121.9cm) away from the front face of
the appliance.
* Allow for fi nished fl oor and hearth thickness when setting these dimensions.
** When constructing the enclosure allow for fi nishing material thickness and to maintain clearances.
51"
(1295mm) *
31"
(787mm)**
50" (1270mm)
61 ½"
(1562mm)
STEEL STUD
STEEL
HEADER
W415-1501 / E / 12.17.18

6.0 framing

EN
21