About This Manual; Repair; Necessary Repairing Tools - Makita HP331D Repair Manual

ABOUT THIS MANUAL

The number in the parenthesis () is the item number on the exploded diagram
2.

REPAIR

Repair the machine in accordance with "Instruction manual" or "Safety instructions".

2.1. NECESSARY REPAIRING TOOLS

Code No.
1R003 Retaining ring pliers ST-2N
1R212-A
Tip for retaining ring pliers
1R212-B Plate set (with screws)
1R231 1/4" Hex. shank bit for M8
1R359 Chuck removing tool
- Hex wrench 8
- Bit adapter
Description
(Figure 1, Figure
Use for
removing Ring spring 10
use with 1R003 in order to remove/ assemble Ring spring 10
disassembling Drill chuck (10)
disassembling Drill chuck (10)
If it is impossible to remove as per the illustration in 3-2-1, refer
to Repair Tool List.
disassembling Drill chuck (10)
disassembling Drill chuck (10)
October 2015
2, Figure 3).
7 / 18