Advertisement
Installation Procedure on WindowsNT
Requirement:
1. SCSI host adapter
SCSI host adapter controls the command and data transfer between MO drive and host
computer. (Ex. AHA-2940, AHA-3940)
2. Device driver
Device driver controls MO drive. WindowsNT include the Device Driver. If you use
RMO-S551, we recommend to use the "Formatter One Pro
S551.
3. SCSI cable
SCSI cable is used for connecting host adapter and MO drive. Please select proper
SCSI cable.
4. Format Utility software
Format utility software is used to format media and make partitions. Format utility is
often supplied with SCSI host adapter. If you use RMO-S551, we recommend to use the
"Formatter One Pro
Installation:
1) Connection
- Set the SCSI host adapter into the host computer.
- Attach the MO drive using proper SCSI cable.
- Set proper SCSI ID and termination on the MO drive.
2) No device driver
2)-1 Preparation
- Turn on the drive and insert the media.
- Turn on the power of the host system and boot WindowsNT.
- Let it Autoconfigure the hardware.
2)-2 Format the media and partition
a) Click the Start button and point to Program "Administrative Tools".
Click on Disk Administrator
- Verify to write signature to the media.
- Highlight the drive icon to be partitioned.
- Click on File, then Create Partition
- Choose partition parameters and click OK.
- Close Disk Administrator....save changes when asked.
SMO-F551 / RMO-S551 Installation Guide
TM
" bundled with RMO-S551.
Installation Guide
Installation Guide
Installation Guide
TM
7
" is supplied with RMO-
Advertisement
