CARNES Comfort Control User Manual page 7

Option 5: Setting the Night or Off
Airflow
Factory Default 50%
This option sets the airflow during night mode or on days off.
1. Press and hold the MENU key to display
Option 05.
2. Use the UP / DOWN keys to change the
night time / off airflow.
Press ENTER to save the changes and
3.
return to normal operation.
4. Or press and hold MENU to save the
changes and display the next option.
Option 6: Setting the change in damper
position per degree
Factory Default 10%
This option sets how much the damper position will adjust for each
degree difference between room temperature and the set point
temperature.
Press and hold the MENU key to display
1.
Option 06.
2. Use the UP / DOWN keys to set the
change in damper position for each
degree difference between setpoint and
room temperature.
3. Press ENTER to save the changes and
return to normal operation.
Or press and hold MENU to save the
4.
changes and display the next option.
Option 7: Turning on Temperature
Display in Remote Control Mode
Factory Default
This option displays the room temperature on the display in remote
control mode. The UP / DOWN keys are used to adjust airflow.
1. Press and hold the MENU key to display
%
Option 07.
2. Use the UP / DOWN keys to turn the
option on or off.
Option
3. Press ENTER to save the changes and
return to normal operation.
4. Or press and hold MENU to save the
Menu
changes and display the next option.
Enter
The temperature(shown in grey) is displayed
below the airflow %.
After the first command, the remote control
will display whether the system is in heating
(Heat) or in cooling (Cool). The system mode
is determined by a temperature sensor in
the actuator measuring the discharge air
temperature.
%
Option
Option 8: Setting the minimum airflow
allowed.
Factory Default
Menu
This option sets the minimum airflow allowed and can be used to
Enter
minimize damper noise.
1. Press and hold the MENU key to display
Option 08.
Use the UP / DOWN keys to set the
2.
minimum airflow allowed.
3. Press ENTER to save the changes and
return to normal operation.
7
Off
Option
Menu
Enter
Heat
Linked
Tu
Menu
0%
Option
Menu
Enter
%
AM
Remote
%