Table of Contents
Advertisement
Quick Links
User Manual
Rev A Nov 2014
Remote Thermostat
Comfort Control
The Remote Thermostat Comfort Control is a
touch screen control that operates either as a
remote control or a thermostat to control airflow
into a space. The Remote Thermostat is battery
powered and communicates wirelessly to the
actuator using the FCC ISM 915MHz band.
The Remote Thermostat can be placed on a table
in a space or permanently attached to a wall.
Operating Modes
The Remote Thermostat can be operated in either Remote Control Mode or Thermostat Mode. For best
performance, operate in one mode - don't repeatedly switch between modes.
Important!
Some systems may have controls that set certain limits, such as the discharge air temperature. Check with your
installer to see which mode, Remote Control or Thermostat, is best suited for your system.
Remote Control Mode
In remote control mode, airflow is controlled by the user and can be adjusted from 100%, fully open, to 0%, fully closed. The user
simply pushes the UP or DOWN key to control the amount of airflow into the space.
Airflow displayed
%
Heat
Linked
Tu
AM
Menu
Remote
Thermostat Mode
In thermostat mode, airflow is controlled by the set point and room temperature, and whether the system is in heating or cooling. A
schedule can be programmed into the thermostat to control airflow for daytime and night time, or for days off.
Hold Mode.
Thermostat controls
o
F
Indoors
airflow.
Link
ed
Set To
Tu
Hold
AM
Thermostat
Menu
Remote/Thermostat
Airflow and temperature
displayed
%
Heat
Linked
Tu
AM
Menu
Remote
Schedule Mode.
Thermostat controls
o
F
Indoors
airflow and switches
between day or night
mode depending on the
Linked
Set To
schedule and the time of
Tu
Schedule
AM
day.
Day
Thermostat
Menu
LED indicator
R e m
o t e
Night / Off Mode.
Thermostat sets the
%
damper to the Night
Time / Off Airflow
setting.
Linked
Tu
Schedule
AM
Nite
Thermostat
Menu
Link switch
Actuator
Form 17001
Advertisement
Table of Contents
Summary of Contents for CARNES Comfort Control
-
Page 1: User Manual
Remote Thermostat Comfort Control LED indicator Link switch The Remote Thermostat Comfort Control is a touch screen control that operates either as a remote control or a thermostat to control airflow into a space. The Remote Thermostat is battery powered and communicates wirelessly to the actuator using the FCC ISM 915MHz band. -
Page 2: Remote Control Operation
LCD Touchscreen Important! The remote thermostat has been designed for long battery life and will “sleep” when not in use to maintain battery life. A moderate touch is recommended to “wake up” the remote thermostat. A moderate, steady touch is recommended to operate the keys. Pressing hard will not make the thermostat respond faster and may damage the LCD touchscreen. -
Page 3: Thermostat Operation
Thermostat Operation In Thermostat mode, the Remote Thermostat automatically Thermostat Schedule Mode controls the amount of airflow using the room temperature, In the Schedule Mode, the thermostat controls airflow using the set point temperature and whether the system is in heating Indoor temperature and the setpoint temperature set by the user. -
Page 4: Changing The Schedule
Set the Time of Day Changing the Schedule The Remote Thermostat is preprogrammed with a seven day Press the Time (shown in grey). schedule as shown below: Indoors Thur 7:00 AM 7:00 AM 7:00 AM 7:00 AM 7:00 AM 7:00 AM 7:00 AM Night 9:00 PM... -
Page 5: Installing Batteries
Table Top and Wall Mounts Calibrating the Temp Sensor The Remote Thermostat is shipped with a foot for table Press AIRFLOW or INDOOR TEMPERATURE (shown in grey). top use and a sub-base for wall mounting. Remote Control Mode Thermostat Mode Important! The sub-base snaps are not designed for repeatedly Indoors... -
Page 6: Option 1: Cleaning The Touch Screen
Options and Factory Defaults Options are set using the Menu key. The MENU key is also used to set the schedule. Scroll through the options by pressing and holding the MENU. Schedule options are displayed first, then Options. Continue to press and hold until Option 01 is displayed. - Page 7 Option 5: Setting the Night or Off Option 7: Turning on Temperature Display in Remote Control Mode Airflow Factory Default Factory Default This option sets the airflow during night mode or on days off. This option displays the room temperature on the display in remote control mode.
-
Page 8: Year Limited Warranty
Night / Off Mode. In Night / Off Mode, airflow will adjust to the setting set in Option 5. Or, if a day off has been set in the schedule, the thermostat may have gone into Verona, WI 608-845-6411 Night / Off mode. www.carnes.com carnes@carnes.com...