Advertisement
2. Launch the Finder program on the Genius™ CD-ROM in ..
BM2x0 IP Finder.zip
3. Set the Genius™ Tools>Options>Communications window to TCP/IP and in the
Device address or name field, input the IP address returned by the finder program.
The port number is 51235. Then click OK.
4. Perform a Device>Get (configuration) from Genius™.
Devices working in DHCP may be assigned different IP addresses at each
powerup, therefore steps 2 - 4 of the above procedure may need to be
repeated at successive connections between Genius™ and the scanner.
NOTE
Static IP Addressing (DHCP Disabled)
1. Read the Ethernet TCP/IP enabled DHCP disabled barcode using the X-PRESS™
Autolearn function (as described in chapter 1).
2. Before changing the Ethernet network settings on the PC running Genius™, close
any open applications which use network resources (i.e. Outlook, or Web browser).
3. On the Configuration PC, from the Control Panel>Network Connections, right-click on
the LAN connection icon and open the properties window.
4. Select the Internet Protocol (TCP/IP) item and open the properties window.
16
Setup Procedure Using Programming Barcodes
to determine the IP address assigned to the scanner.
Doc\Software Utilities\QL500-
Advertisement
