Advertisement
6 TCP/IP ETHERNET INTERFACE TO HOST
For any DS2x00N-DS4800 Family scanner having software package 005 or later, connected
to either a QL500 or to a BM2x0 module (inside a CBX connection box), you can setup the
Ethernet communication with programming barcodes.
Ì$CBETHD$-}Î
Ethernet TCP/IP enabled
DHCP enabled
Using the X-PRESS™ interface setup functions described in the Quick Reference Guide,
correctly position the scanner and read one of these barcodes with the AutoLearn
function.
The scanner can now communicate using Ethernet TCP/IP.
For scanner configuration through Genius™ using Ethernet TCP/IP, follow one of the
procedures in the next paragraph.
The Factory Default static IP address parameter settings for all DS2x00N-DS4800 Family
scanners are:
IP Address = 172.16.11.0
Subnet Mask = 255.255.0.0
Gateway Address = 172.16.0.2
IP ADDRESS ALIGNMENT PROCEDURES FOR CONFIGURATION
In order to connect a scanner to Genius™ using Ethernet TCP/IP, the Ethernet IP
Addressing parameters must be aligned between Genius™ and the scanner. The following
procedures can be used:
DHCP Enabled
1. Read the Ethernet TCP/IP enabled DHCP enabled barcode using the X-PRESS™
Autolearn function (as described in chapter 1).
Setup Procedure Using Programming Barcodes
Ì$CBETHN$-\Î
Ethernet TCP/IP enabled
DHCP disabled
(uses static IP Address parameters)
15
Advertisement
