Hisense Laser TV User Manual page 19

3. Repeat the steps above until the top of the image is parallel
with the screen.
4. Rotate the back-left foot to the same height as the right one
and make sure the TV sits stably.
ADJUST THE UPPER-LEFT CORNER OF THE IMAGE
1. If the top of the image is higher on the left and lower on the
right, then use the wrench to rotate the back-left foot of the
TV clockwise so that the bottom of the image is also higher
on the left. The upper-left corner will expand further by
default. Make sure part of the image is displayed beyond the
upper-left corner of the screen.
back-left foot
2. Now, rotate the TV clockwise so that the bottom of the image
is parallel with the screen.
3. Repeat the steps above until the top of the image is parallel
with the screen.
4. Rotate the back-right foot clockwise to the same height as the
left one and make sure the TV sits stably.
FILL THE TOP OF THE IMAGE TO THE SCREEN
If the top of the image is wider than the screen, then use the
wrench to rotate the center-front foot of the Laser TV clockwise.
center-front foot
11