NEC JC1402HME Service Manual page 4

•
GENERAL
MultiSync II, The Intelligent Monitor, from NEC, is a high resolution color monitor that automatically
adjusts to graphics board scanning frequencies from 15.5kHz to 35kHz (Horizontal), 50Hz to 80Hz
(Vertical). MultiSync II gives IBM PC, PC/XT, PC/AT, Personal System/2 (PS/2) and compatible
computers users of crjsp text and vivid color graphics displays when used with any of the IBM graphics
adapters (the CGA, EGA, PGC, VGA or MCGA). MultiSync II can also be used with other IBM compatible
graphics adapters to provide users with the widest range of color monitor compatibility and capability
available in the market place.
FEATURES
• MultiSync II automatically scans all horizontal frequencies between 15.5kHz and 35kHz, and all
vertical frequencies between 50Hz and 80Hz.
• MultiSync II is compatible with the IBM PC, PC/XT, PC/AT, PS/2 and look-alikes.
• MultiSync II is compatible with the IBM Color Graphics Adapter, the IBM Enhanced Graphics
Adapter, the IBM Professional Graphics Controller, the IBM MultiColor Graphics Array, the IBM
Video Graphics Array and other IBM compatible graphics adapters.
• MultiSync II's wide compatibility makes it possible to upgrade boards or software without purchasing
a new monitor.
• MultiSync II has a maximum horizontal resolution of 800 dots and a maximum vertical resolution of
560 lines for superior clarity of display.
• MultiSync II offers both TTL and ANALOG signal inputs, and in the ANALOG mode can display an
unlimited palette of colors depending on the graphics board and software being used.
MultiSync II automatically adjusts to' either a TTL signal input or an ANALOG signal input.
• MultiSync II features a TEXT SWITCH (TTL mode only) with a choice of three colors (paper white,
amber and green) displaying word processing, spread sheets, databases or other software in crisp
alphanumeric text on a black background.
• MultiSync II has a 14 inch diagonal display and a large, 13 inch viewing area.
CAUTIONS
When setting up iJnd using the MultiSync II pay special attention to these points
• To eliminate eye fatigue, don't use the MultiSync II against a bright background or where the sun or
other lights can directly shine on it.
• For optimum viewing, the MultiSync II should be just below eye level.
• Allow adequate ventilation all around the MultiSync II so that heat from the monitor can properly
dissipate.
• Don't rest the MultiSync II or other heavy objects on the power cord. A damaged power cord can
cause fires or electrical shocks.
• Keep the MultiSync II away from high capacity transformers, electric motors and other strong
magnetic fields.
• Don't drop the MultiSync II when transporting it.
• Don't use the MultiSync II in damp, dusty, or dirty places.
-·2-
.-