LG BH9530TW Service Manual page 7

8. Select [Next] and press ENTER ( ).
9. Press ENTER ( ) to verify the test tone signals of
the speakers.
After verifying the test tone signals, press ENTER
( ) while [Stop] is highlighted. Select [Next] and
press ENTER ( ).
9. You can listen to TV sound through HTS speaker
automatically when TV is turned on. TV and HTS
should be connected with optical cable.
Press to move and press / to select [On] or
[Off]. Select [Next] and press ENTER ( ).
11. Check all the settings that you have set in the
previous steps.
Press ENTER ( ) while [Finish] is highlighted to
fi nish the initial setup settings. If there is any settings
1
to be changed, use / / / to select and
press ENTER ( ).
1-6