Care And Cleaning - Kenmore 111.7303 Series Use & Care Manual

1. Water Dispenser
• Clean the water collecting tray with a sponge or
absorbent cloth.
2. Ice Storage Bin
• Removing: Pull out and remove the ice cube bin
• Cleaning: Empty the ice cube bin and clean with
lukewarm water.
Thoroughly dry the bin and screw conveyor to
prevent new ice cubes from sticking.
• Replacing: Push the ice cube bin all the way back
onto the supports until it locks into position.
If the bin cannot be pushed all the way back, rotate
the ice auger a quarter turn and insert again.
3. Freezer & Refrigerator Bins
• Hold both ends and pull up.
F706-10( )(Kenmore).indd 30

CARE AND CLEANING

4. Refrigerator Shelves
To remove a shelf: Lift up
on front of shelf with one
hand and with other hand
push up on back of shelf
to release attachment
hooks from attachment
slots. Pull the shelf out.
To reinstall a shelf: With
front of shelf angled
slightly up, engage hooks
on back of shelf into
attachment slots, and
then lower front of shelf
into place.
CAUTION : Make sure that shelves are level from one
side to the other. Failure to do so may result in the shelf
falling or spilling food.
30
3
3
2019-03-04 10:40:31