Trouble Shooting - Gaggenau VL 200 120 Instruction Manual

Trouble shooting

m
Warning – Risk of electric shock!
T r o u b l e s h o o t i n g
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our trained after-sales engineers.
If the appliance is faulty, unplug the mains plug or
switch off the fuse in the fuse box. Contact the after-
sales service.
Disruption
The appliance is not working
After the appliance has been switched
off, the illuminated ring flashes white
slowly 3 times and an audible signal
sounds.
After the appliance has been switched
off, the illuminated ring flashes white
rapidly 6 times and an audible signal
sounds.
The appliance switches itself off while in
use; the illuminated ring is flashing
orange and white alternately
Appliance runs in automatic mode, illu-
minated ring flashes orange
--------
Faults often have simple explanations. Please read the
information in the table before calling the after-sales
service.
Possible cause
No connection to the remote fan
unit.
Power failure
The fuse/circuit breaker is faulty Check in the fuse box to make sure that the fuse/
The metal grease filter is satu-
rated.
The activated charcoal filter in the
remote fan unit is saturated.
Safety switch-off function:
The controls on the appliance
have not been used for a long
time
The appliance remains off after a
power failure
Automatic sensor is faulty
Solution
Check whether the plugs of the connection cable
are properly inserted.
Check whether other kitchen appliances are work-
ing.
circuit breaker for the appliance is in working order.
Clean the metal grease filter. ~
maintenance" on page 11
Change the activated charcoal filter in the remote
"Cleaning and maintenance"
fan unit. ~
on page 11
Turn the control knob to 0, then switch it back on (if
you wish to continue using the appliance)
Turn the control knob to 0, then switch it back on (if
you wish to continue using the appliance)
Turn the control knob to 0, then switch it back on
If the illuminated ring continues flashing after you
have switched the appliance back on, contact the
after-sales service
Trouble shooting
en
"Cleaning and
13