Table of Contents
Advertisement
To connect power via fused DC power cable to the CSW-10AT-LFT
Meter. First make sure the On/Off Switch on the rear of the meter
is in the OFF position. Connect the ring terminals
fork lift
battery.
Next, connect the other
end of the cable to the
rear of the meter for
power.
Power
PIN #
DESCRIPTION
A -------- +12VDC
B -------- GND
Meter Connections
Communications port
PIN #
DESCRIPTION
3 ----------- TXD
4 ----------- +5v
5 ----------- SGND
directly to the
Signal connection
PIN #
DESCRIPTION
1 ----------- +EXC
2 ----------- -SIG
5 ----------- SHIELD
6 ----------- -EXC
7 ----------- +SIG
LOAD CELL
10
Advertisement
Table of Contents
